Tuesday, April 17, 2007
Elefante Pattern Printable
My new friend, Jill, has been generous enough to put Elefante into a printable format for you. You can get to the pdf here.
Thank you, Jill!
best, susie
Page 18 Elefante
The pattern for Elefante is finally here for the taking. This pattern came to be when a knitter emailed me after spying a tiny striped elephant on a shelf in Itty-Bitty Hats on page 18. She wanted to know where to get the pattern. I had no idea where that elephant came from until a friend (thanks Renee) told me about this site. I am sure the original is a crocheted toy from this site and boy oh boy, are the other toys available here ever cute. I decided to make a pattern for a knitted version of this little guy and share it with you here. Have fun and please let me see your finished Elefante!
Warning: Please be sure to use your discretion when using poly-pellets for filling your knitted toy. If your elefante is intended for a baby, please be sure to not use poly-pellets or make a muslin bag to hold the pellets before putting them inside the elefante. The other option is to only use the fiberfill to stuff the toy. The pellets would be considered a choking hazard for babies and toddlers if they leak through the fabric. My elefante is knitted with a tight, dense fabric that holds the pellets inside and it is not for a baby, it's for me! Enjoy.
Materials:
Set of 5 double-pointed needles US size 4
Size E crochet hook
Fiber-fill
Poly-pellets
Yarn needle
Scissors
Stitch marker
Yarn:
Cascade 220 in Red, Pink, Orange and Lime
Julia by Kristin Nicholas in Dark Blue and Light Blue
Small amount of black to embroider eyes
**Any worsted weight yarn will do and this is a perfect project to use up your stash. Try not to buy new yarn for this pattern! Make up your own colorway for the stripes. You only need very small amounts of each color to complete Elefante.**
Finished measurement:
5-inches tall by 6-inches in length (he's tiny!)
Gauge:
6 stitches per inch
Stripe Pattern: (used throughout except the ears and where specified)
2 rounds of each of the colors in the following order:
Red
Pink
Orange
Lime
Dark Blue
Light Blue
Tip: Since this is a stuffed toy and the inside will never be seen, I cut and tied the ends of the different colors on the inside as I worked. This will hold together better because toys are often pulled and squeezed by little ones, at least I hope so! Don't worry about the ends is what I am trying to say and go ahead and tie some knots! Really!
Abbreviations:
Rnd round
sts stitches
k knit
k2tog knit 2 stitches together
m1 create a new stitch by placing the bar in between 2 stitches on the left needle from front to back, then knit it through the back of the loop.
kfb knit into the front and back of the same stitch
With Dark Blue cast on 21 stitches and place 7 stitches on each of three double-pointed needles. Join to knit in the round and place a marker on the first stitch also being careful not to twist the stitches. Knit every round working 2 rounds of each Dark Blue, Light Blue, Red and Pink.
In Pink only continue as follows:
Rnd 1: purl
Rnd 2: (k5, k2tog) on each needle (6 sts per needle, 18 sts total remain)
Rnd 3: knit
Rnd 4: (k4, k2tog) on each needle (5 sts per needle, 15 sts total remain)
Rnd 5: (k3, k2tog) on each needle (4 sts per needle, 12 sts total remain)
Rnd 6: (k2, k2tog) on each needle (3 sts per needle, 9 sts total remain)
Cut the yarn and place on a yarn needle. Pull through the remaining 9 stitches tightly to close the hole. Weave in the end to the inside. Pour poly-pellets in the leg to about half full, fill the rest with the fiber fill. The top of the leg remains open. Set the legs aside for now.
Body:Working in the stripe pattern beginning with Red, cast on 9 stitches with 3 stitches on three double pointed needles. Join to knit in the round, placing a marker on the first stitch and being careful not to twist the stitches.
Rnd 1: kfb of each stitch
Rnd 2: (k1, kfb) across each needle
Rnd 3: (k2, kfb) across each needle
Rnd 4: (k3, kfb) across each needle
Rnd 5: (k4, kfb) across each needle
Rnd 6: (k5, kfb) across each needle (21 stitches per needle and 63 stitches total are on the needles)
Place a marker on a Rnd 6 stitch. This will be used for measuring in a moment.
Continue in the stripe pattern and knit straight for 2 1/2 inches from the stitch marker you placed on Rnd 6. Now begin the decrease rounds.
Rnd 1: (k5, k2tog) across each needle
Rnd 2: (k4, k2tog) across each needle
Rnd 3: knit
Rnd 4: (k3, k2tog) across each needle
At this point, tightly close the hole on the bottom of the body where you cast on with a yarn needle and matching end of yarn. Now fill the body first with the poly-pellets to about 1/3 full. Fill the rest of the body with the fiber fill up to where you are working. You need to add more fiber fill as you finish up the body before closing the hole at the top.
Rnd 5: knit
Rnd 6: (k2, k2tog) across each needle
Rnd 7: knit
Rnd 8: (k1, k2tog) across each needle
Rnd 9: knit
Rnd 10: (k2tog) across each needle (9 stitches remain)
Cut the yarn and thread onto a yarn needle. Complete any remaining stuffing at this time. Pull the end through the remaining 9 stitches and pull up tight. Weave in the end to the inside. This end is the top of the body.
Take the four completed and stuffed legs and whip stitch the legs to the bottom side of the body.
Trunk and Head:
With Pink cast on 9 stitches placing 3 stitches on each of three double-pointed needles. Join to work in the round, placing a stitch marker on the first stitch and being careful not to twist the stitches.
Rnd 1: (k2, kfb) across each needle
Rnd 2: (k3, kfb) across each needle
Rnd 3: (k4, kfb) across each needle
Rnd 4: purl
Rnds 5 and 6: knit
Switch color to orange and continue in the stripe pattern as set. Knit every round until the trunk measures 1 1/4 inches from the purl round (rnd 4 of the trunk). Now you will start increasing to form the head.
Rnd 1: (k2, kfb) across each needle (8 sts/needle, 24 sts total)
Rnds 2-4: knit
Rnd 5: (k3, kfb) across each needle (10 sts/needle, 30 sts total)
Rnd 6: knit
Rnd 7: (k2, m1) 4 times, k2 across each needle (14 sts/needle, 42 sts total)
Rnds 8-10: knit
Now you will move the stitches onto 4 double-pointed needles using the fifth or free needle to knit onto as follows:
Needle 1: 8 stitches
Needles 2 and 3: 13 stitches
Needle 4: 8 stitches
Continue with round 11.
Rnd 11:
Needle 1: knit all stitches
Needles 2 and 3: k1 (m1, k2) 6 times (19 stitches on needles 2 and 3)
Needle 4: knit
54 stitches total are on the needles.
Rnd 12: knit all stitches
Rnd 13:
Needle 1: knit all stitches
Needles 2 and 3: (k6, m1) 3 times, k1
Needle 4: knit all stitches
60 stitches total are on the needles.
Knit every round straight until the head and trunk measure 4 1/2 inches from the purl round of the trunk. Now you will start the decrease rounds for the top of the head. You may have to do some redistributing of the stitches as you work for the decreasing.
Rnd 1: (k4, k2tog) across all stitches
Rnd 2: knit
Rnd 3: (k3, k2tog) across all stitches
Rnds 4 and 5: knit
Rnd 6: (k2, k2tog) across all stitches
At this point close the hole tightly on the bottom of the trunk with a yarn needle and end. Fill the trunk with poly-pellets and then fill the head with fiber fill up to the working round. You will need to continue stuffing the head as you complete the head.
Rnd 7: knit
Rnd 8: (k1, k2tog) across all stitches
Rnd 9: knit
Rnd 10: (k2tog) across all stitches (10 stitches remain)
Cut the yarn and thread on a yarn needle. Pull through the remaining 10 stitches. Complete any remaining stuffing and pull up tight. Weave the end to the inside.